Thank You for visiting our web site ComiPack LLC.

MC-30

MC-30 Auto-Calibrate: 

  • Volumetric dosing principle
  • Gravimetrically auto-calibrating, additive feeder
  • Low investment, high savings
  • Accurate and reliable, 5 years warranty

 

 The MC-30 Auto-Calibrate

  •  Service Centre of  Movacolor Calibration of a volumetric dosing unit is time consuming. All information - all individual weighing results - must either be entered into the unit or manually interpreted. Movacolor invented the MC-30 Auto-Calibrate. This fully automatic calibration method is a Movacolor patent. It is as simple as it is brilliant.

    When used with the optionally available remote gravimetrical calibrator, manual calibration is no longer required with the MC-30 Auto-Calibrate. This technology eliminates complicated guesswork. Calibration results can be stored and easily copied to other MC-30s using a PC laptop with Windows Explorer. The integrated automatic voltage selector ensures consistent operation even when there are fluctuations in the power grid. The standard integrated hopper loader controller enables you to work with Movacolor automatic hopper loaders, ensuring adequate supply of material at all times.
  • consulting 
  • on-line technical support _ ТеL.: +7- 903 - 972 - 6 - 519  

 

 

 

Output Ranges
Dosing system Dosing capacity
gram/sec
Dosing capacity
Kg/hour
Type GL* 0.02 to 0.4 0.07 to 1.44
Type G* 0.2 to 7 0.72 to 25.2
Type A-20* 0.5 to 20 1.8 to 72
Type A-30** 2.0 to 50 7.2 to 180

Note* measured with granular masterbatch 0.8 kg/dm³
Note** only available with high torque (4 Amp) stepper motor

 

Calibration Method/ControlsUse the calibrator and enter the production data. The unit will then automatically self-calibrate (see above) and provide accurate gravimetrical data to the system to operate. The data is stored automatically.

 

Controls- Set % setting for injection molding.
- Set % setting for extrusion.
- Extrusion control.
- Relay or by tacho standard.
- Injection molding control:
- Automatic metering time synchronization.
- Or by manual timer.
- Manual speed and time setting.
- 4 keyboard lock levels.
- Integrated hopper loader controller.

 

Memory modesProduction (data logger): up to 2 x 24 hours can be stored.
Production memory, up to 1500 machine settings can be stored.

 

Monitoring/System Information/ External communication4-piece 7 segments LED at front display.
Man/machine interface: keypad.
External communication: none.
Alarm: LED indication, 1 external alarm.

 

Specifications/Standards & DirectivesExternal Communication:
128 x 64 full graphic LCD front display with integrated backlight
Man/machine interface:
using full language command structure;
standard languages, English, German, French, Spanish, Italian, Portuguese, Turkish, and Swedish; other languages on request.
External communication:
PC link using TCP/IP Internet protocol;
optional RS 232 or 485 available.
Alarm: 2 user-programmable alarm levels.

 

Specifications/Standards & DirectivesTechnical data:
Operating power from 80 VAC to 260 VAC, 50 and 60 Hz by integrated automatic voltage selector.
Power consumed 80 Watt maximum.
Stepper motor (1.8 degr/step) max 2 Amp or 4 Amp at 40 Volt.
Operating Temperature: -20 to + 70 degr. C.

Input signal(s):
Injection molding:
Start/stop trigger input, potential free or 0 .. 24 VDC. Input for level sensor.
Extrusion:
Start/stop trigger input, potential free or 0 .. 24 VDC. Tacho input, 0 .. 30VDC Input for level sensor.

Output(s):
Stepper motor max output 2 Amp or 4 Amp (40 VDC)
- Solid State 24 VDC/0.5 A output, for valve hopper loader.
- Solid State 24 VDC/0.5 A output for external warning alarm.
- Relays for alarm level free programmable.
- Relays for alarm level free programmable.
All free programmable outputs are capable of driving up to 5 Amp 230 VAC/30 VDC.

 

Standards and Directives:Protection class: IP-50.
According to CE standards:
EN50081-2 (HF radiation industry).
EN50082-2 (HF immunity industry).

Safety
- In case of overload due to short-circuit or incorrect connection, the power supply automatically shuts down.
- Opto insulated start input for connection to production machine.

 

Machine connection flanges Standard flange NST40 with cleaning opening and inlet/outlet Ø 50mm/  40mm, steel epoxy coated.
Flange type NST90 with cleaning opening and inlet/outlet Ø 50mm/  90mm, steel epoxy coated.
Water-cooled flange NBH(A) inlet/outlet 50 mm/50 mm, stainless steel ANSI 304.
Water-cooled flange NPHA inlet/outlet 100 mm/100 mm, stainless steel ANSI 304.
Other flange types custom-made on request.

 


© 2011 Comipack
E-mail:  info@comipack.net
Telephone: +7(495) 737-67-60, +7(495) 589-05-93, +7(926) 182-83-28
Address: Moscow